top of page

200 Watt Low Pass Filter 1.8 – 54MHz

Tactical Radio Gear’s LPF-200W low pass filters, are intended to suppress TVI, RFI, and other sources of interference by eliminating unwanted EMI. 

Harmonics that cause TVI difficulties can be virtually eliminated, with the LPF-200W filter, keeping your neighbors pleased, while you enjoy your ham radio hobby.

  • RF Connector Type: UHF female (SO-239) ‘N’ available on request.

  • Filter Impedance: 50 ohms 

  • Filter Frequency Range: 1.8-54 MHz 

  • Cutoff Frequency: 60 MHz 

  • Attenuation: >55 dB at 145 MHz 

  • Pass Band Insertion Loss: <0.15 dB 

  • Power Capacity: 200 W @ 100% Duty

  • Size: 1.8"W x 1.7”H x 4.0” D inches.

Tactical Radio Gear’s LPF-200W (Low Pass Filters) are commercial grade, multi-element filters, designed with the highest quality components, to remove both image and harmonic interference, in-order to suppress TVI and interference to other radio services.

The LPF-200W, HF transmit Low Pass Filters, achieve outstanding suppression, which effectively eliminates out of band noise and interfering signals. The real advantage(s), of the LPF-200W, when used between the transmitter and Antenna; amplifier or Tuner, is the virtual removal of (TVI) when operating below 30 MHz. 


The LPF-200W delivers extremely low loss, even at 200 watts with a 2:1 SWR load. 

bottom of page